| TESTING YOUR ENERGY APPLIANCE
The easiest way to test whether your energy appliance is functioning properly is through a technique known as muscle testing. You will need a partner to assist you in performing this test. When conducted properly, this test yields remarkably accurate results.
The test has two parts. In the first step, you will be testing whether or not you and your partner's energy fields are communicating properly with one another. If the first part of the test does not yield expected results, do not continue to part two of the test. We suggest you try the first step at a later time or with a different partner.
First Step: Tests whether your energy field and that of your partners are communicating properly with one another.
1. You and your partner should face one another on a flat level surface. Your partner raises his/her right arm out to the side to shoulder height.
2. You place your right hand above your partners head with the palm facing downward. Place two fingers from your left hand slightly above your partners raised right wrist.
3. Instruct your partner try to resist the downward pressure you will be exerting on their extended arm.
4. Press down firmly and evenly on your partners arm slightly above the wrist with your two left fingers and note the level of resistance and strength of your partner.
5. With your partner continuing to keep their arm raised, now place your right hand above your partners head with the palm facing upwards.
6. Once again, ask your partner to resist the downward pressure as you press firmly on their right wrist being careful to use the same degree of downward pressure as used previously.
7. After noting the level of resistance and strength of your partner, they may lower their right arm for a brief respite.
If the energy fields of the two parties are communicating properly, you will both notice a distinct difference in your partners ability to keep their arm strong. When your palm faces downward, an energy "circuit" is completed between the two parties resulting in increased strength. When your palm is upraised, this energy "circuit" is broken which does not allow the energy of both parties to aid in strengthen the arm and weakness occurs.
If there is not a noticeable difference in your partners responses, stop the test at this point and try again at another time or with a different partner. If you continue with the test at this point, your results will be unreliable.
If the first step showed that you and your partner's energy fields are communicating properly you may move onto the next step. We recommend allowing your partner to rest his/her arm briefly before proceeding so that fatigue does not affect the accuracy of your results.
Second Step: Tests the effectiveness of the energy appliance or answers a question posed about another object.
1. Once again, you and your partner should face one another on a flat level surface. This time your partner holds the energy appliance (or other object to be tested) in the palm of their left hand. The object being tested must be held firmly within the palm of the left hand, it should not be held just in ones fingertips
2. Then your partner raises his/her right arm out to the side to shoulder height.
3. This time you place your right hand on your partners right shoulder with the palm facing downward while placing two fingers from your left hand on your partners raised arm slightly above the right wrist.
4. Instruct your partner try to resist the downward pressure you will be exerting on their extended arm. Before pressing down you must ask a question requiring a yes or no answer relative to the object being tested such as; "Is this energy mug (egg, pad etc.) working properly and energizing my food/liquids?" or "Is the energy level of this appliance greater than 6,500 Bovis?" This question should be asked out loud so that both you and your partner can hear it.
5. Press down firmly and evenly on your partners arm above the right wrist with your two left fingers, being careful to use the same degree of downward pressure as used previously, and note the level of resistance and strength of your partner. If your partner is able to maintain their strength, then the answer to your question is "yes". If your partner experiences marked weakness at this point, the answer to your question is "no".
Testing Tips: To ensure consistent results every effort should be made to exert the same degree of downward pressure on your partners arm when performing this test. In addition, since only two fingers are used, this firm downward pressure should not be excessive. A steady even pressure delivered briefly, is the best.
AMAZE YOUR FRIENDS AND FAMILY WITH THESE VARIATIONS ON THIS EASY TEST
The Before and After Energizing Comparison -
Just about anything can be tested with this technique. We like to use it to demonstrate how using our energy products can change the characteristics of many items we use daily from "bad for you" to "better for you". This is often done by testing items people clearly know are bad such as cigarettes, sugar, milk, caffeine and so on.
To do this you should perform the Second Step of the test TWICE, essentially performing a "before" and "after" comparison. Do Step Two with the same item without energizing it with an appliance and again after energizing it with an appliance for 5 minutes. The results will amaze you! In this case, the question asked can be some thing like "Is this object (cigarette, sugar etc.) good for you?" while your partner holds the item. If the answer is "yes" the arm will remain strong, if the answer is "no", the arm weakens.
The Restorative Properties of Energized Water Comparison -
Following the first step, have your partner eat or drink something that has not been energized such as milk, a sweet bakery product, soft drink or similar. Perform the Second Step for the first time noting the results. Then have your partner drink three to four ounces of water that has been energized in your mug for a while. It is truly amazing how your partners strength will be instantly regained after drink the energized water!
TESTING YOUR ROOM FOR NEGATIVE EARTH ENERGIES
Every home not equipped with a PX Essential Energy Pyramid typically contains places that are energetically positive as well as energetically negative. To maximize the restorative benefits of a good nights sleep, it is particularly important that your bed be placed in an area that is energetically positive. The easiest way to test what parts of your room contain negative earth energies is through a technique known as muscle testing. You will need a partner to assist you in performing this test. When conducted properly, this test yields remarkably accurate results.
The test has two parts. In the first step, you will be testing whether or not you and your partner's energy fields are communicating properly with one another. If the first part of the test does not yield expected results, do not continue to part two of the test. We suggest you try the first step at a later time or with a different partner.
First Step: Tests whether your energy field and that of your partners are communicating properly with one another.
1. You and your partner should face one another on a flat level surface. Your partner raises his/her right arm out to the side to shoulder height.
2. You place your right hand above your partners head with the palm facing downward. Place two fingers from your left hand on your partners raised arm slightly above the right wrist.
3. Instruct your partner try to resist the downward pressure you will be exerting on their extended arm.
4. Press down firmly and evenly slightly above your partners right wrist with your two left fingers and note the level of resistance and strength of your partner.
5. With your partner continuing to keep their arm raised, now place your right hand above your partners head with the palm facing upwards.
6. Once again, ask your partner to resist the downward pressure as you press firmly on their right wrist being careful to use the same degree of downward pressure as used previously.
7. After noting the level of resistance and strength of your partner, they may lower their right arm for a brief respite.
If the energy fields of the two parties are communicating properly, you will both notice a distinct difference in your partners ability to keep their arm strong. When your palm faces downward, an energy "circuit" is completed between the two parties resulting in increased strength. When your palm is upraised, this energy "circuit" is broken which does not allow the energy of both parties to aid in strengthen the arm and weakness occurs.
If there is not a noticeable difference in your partners responses, stop the test at this point and try again at another time or with a different partner. If you continue with the test at this point, your results will be unreliable.
If the first step showed that you and your partner's energy fields are communicating properly you may move onto the next step. We recommend allowing your partner to rest his/her arm briefly before proceeding so that fatigue does not affect the accuracy of your results.
Second Step: Tests for the existence of positive and negative earth energies in different areas of the room being tested.
1. Once again, you and your partner should face one another on a flat level surface. This time your partner must stand on the spot of the room to be tested for two minutes. This allows the partners body to completely align with the earth energy associated with the spot they are standing on.
2. Then your partner raises his/her right arm out to the side to shoulder height.
3. This time you place your right hand on your partners right shoulder with the palm facing downward while placing two fingers from your left hand on your partners raised arm slightly above the right wrist.
4. Instruct your partner try to resist the downward pressure you will be exerting on their extended arm. Before pressing down you must ask a question requiring a yes or no answer relative to spot being tested such as; "Is the energy at this spot positive?" or "Is the energy level of this spot good for placing my bed here?" This question should be asked out loud so that both you and your partner can hear it.
5. Press down firmly and evenly slightly above your partners right wrist with your two left fingers, being careful to use the same degree of downward pressure as used previously, and note the level of resistance and strength of your partner. If your partner is able to maintain their strength, then the answer to your question is "yes". If your partner experiences marked weakness at this point, the answer to your question is "no".
Testing Tips: To ensure consistent results every effort should be made to exert the same degree of downward pressure on your partners arm when performing this test. In addition, since only two fingers are used, this firm downward pressure should not be excessive. A steady even pressure delivered briefly, is the best. .
|
